FREE RETURNS. STANDARD SHIPPING ORDERS $99+
Showing 1–16 of 18 results
1,85 m Bearpaw Stabil Kore 0,4 X 50 mm (2 X 0,015 ) The alternative to carbon brings a considerable increase in efficiency and precision. The performance-enhancing fabric reinforces the limb and in so doing saves material and increases the throwing result considerably. By its cross-woven structure, the lateral twisting of the limb is also…
2 mm thick 5 x 5 inch cork sheet for grips Glue it to your bow with some double sided adhesive tape and it gives a comfortable grip. Cover it with leather for durability
5 mm thick 5 x 5 inch cork sheet for grips. Glue it to your bow with some double sided adhesive tape and it gives a comfortable grip. Cover it with leather for durability
Amazaque wood belly core 25 x 40 x 2050 mm(bot: Guibourtia ehie)
Barrel Tapered Heat tempered planed bamboo Barrel tapered bamboo backing means that the bamboo is thicker in the center and tapers to a thinner dimension toward the tips of the bamboo. This can be advantageous to the bow builder if he is wanting everything to be pre tapered in thickness before gluing. This will help…
Barrell tapered Hickory backing strips are tapered in thickness from the middle to the tips. Rough size is 3 16-1 4 thick in the middle and roughly 1 8 at the tips. Thicknesses may vary slightly from piece to piece. Smooth and ready for glueing . Measures approximatly 1 1 2 wide , and a…
birdseye Maple core veneer 0.5 x 45 x 2050 mm(bot: Acer Saccharum)
Our  Ipe core wood is simple. Clean No Knots. Width is about 1 1 4 wide, length is approx 78 unless you need it cut shorter. These core pieces are for bows that will be receiving a backing and a bellie.The grain will not allow them to be used without a backing. These are excellent…
Carbon inlay 2 inch wide 78 inches long.This carbon comes in a flexible cloth strip. (Upon request we can supply any length or quantity) 250 gram m2
By now a famous Jig used all over the world.Not an original, but a classic in its own right, and very affordable.We have been using these for 15 years. All they need is the occasional bit of lubricant. Tip:Before using the Jig, put some vaseline, string wax, or lubricant on the inside of the clamps,…
Coromandel (macassar or striped ebony) veneer wood, (Bot:Â Diospyros celebica) approx. 0.5 x 45 x 1050 mm
Feather cutting template. You will need a rotary knife and a smooth surface (cutting mat) to work with. Remember to cut towards the beginning of the feather! Over 80 different shapes available, medieval template, eastern template Easy to use The clear Perspex allows you to see your workpiece Both Left and Right-wing available Can be…
Feather cutting template You will need a rotary knife and a smooth surface (cutting mat) to work with. Remember to cut towards the beginning of the feather! ✓Over 120 different shapes are available✓Easy to use✓The clear Perspex allows you to see your workpiece✓Both Left and Right-wing available✓Can be custom-made for you!  Â
Don t forget the gloves for glueing. The best we have found is surgical gloves . These are stronger and more tear resistant than typical rubber gloves that are used for glueing. They are also tighter fitting, giving you much more control.Price quoted is for three pairs.
Plyers you can use to fasten brass rings on your bowstring. These plyers work very well. We use these a lot for fastening screw on arrowheads. Simply an Ideal all round tool
Saunders brass rings. ✓ Red for thicker strings (Dacron up to 16 strands)✓ Black for medium size strings (Dacron up to 12 strands)✓ Per bag of 2 pieces
End of content
End of content
No products in the cart.
