Product on sale

SNAKESKIN CLOTH BACKING Online now

$11.98

23 people are viewing this right now
6 products sold in last 3 hours
Selling fast! Over 16 people have this in their carts
  • Check Mark Estimated Delivery : Up to 4 business days
  • Check Mark Free Shipping & Returns : On all orders over $200
  • Visa Card
  • MasterCard
  • American Express
  • Discover Card
  • PayPal
  • Apple Pay
Guaranteed Safe And Secure Checkout

THIS IS ONE HOT BACKING

Apply to wood, bamboo or glass bows as well as sinew backed bows!

Unlike real snakeskins this backing add tons of strength and insurance to your bow AND it only costs a fraction of what real snakeskins cost!! 

Plus these are much easier to apply.

Use with bowgrip or any other 2k epoxy glue for a watertight backing. 

Or use titebond 2.
These backings are made from lite stretch cotton fabric and it will not slow your bow down. 72 long by roughly 2 wide, this print fabric should be able to cover just about any bow you have. 

The dark area in the center for the handle area can be cut in half if you want to or leave it full length.

This is hot!

 


 1 Cover and protect belly with masking tape 

src= 

 

2 Mix bow epoxy glue well and measure correct 

src=

 3 Apply glue to backing side. Try to get an even spread rather thick 

src=

 

4 Apply glue

 data-mce-fragment=

 

5 Drape the backing into the glue 

src=

 

6 Drape backing on the glue 

src=

7 Gently tap the backing into the glue using a clean disposable brush 

src=

 8 Gently push backing into the glue with the brush so it saturates 

src=

9 Push the backing into the glue gently  

src=

 

10 always make sure you have more to do with one glue mix 

src=

 

11 2 bows different backings 

 data-mce-fragment=

12 Cut of the not used ends 

data-mce-fragment= 

13 Saturation is clearly visible 

src=

 14 Clamp the bow onto a straight piece of wood in the center

src=

 15 One can do 2 bows at  once 

src=

 

16 Clamped 

src=

17 Cut off excess with a sharp blade and remove the masking tapeÂ